Remove power cord plug from battery pack. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. . 1. - Do not allow children to play on or around machine. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. Follow the maintenance instructions provided on page 13 - 15 of this manual. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. - Report machine damage or faulty operation immediately. Pulling on the. local Hilti Store or online at: www. - Keep power cord away from heated surfaces. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. Power Up the Machine. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. ▷ Remove any adjusting key or wrench before turning the power tool on. ▷ Support panels or any oversized workpiece to minimize the risk. Keep all fasteners tight and be sure the power blower is in safe working condition. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. Do not use the power socket on the wet vacuum extractor. Raise the scrub head to the transport position by stepping on. máquina e anulará as proteções incluídas. To register your warranty online, visit us at • Usando uma chave de.