Follow the maintenance instructions provided on page 13 - 15 of this manual. ▷ Remove any adjusting key or wrench before turning the power tool on. . Power Up the Machine. Do not use the power socket on the wet vacuum extractor. Remove power cord plug from battery pack. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. Keep all fasteners tight and be sure the power blower is in safe working condition. local Hilti Store or online at: www. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. ▷ Support panels or any oversized workpiece to minimize the risk. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). - Keep power cord away from heated surfaces. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. 1. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. Pulling on the. máquina e anulará as proteções incluídas. To register your warranty online, visit us at • Usando uma chave de. Raise the scrub head to the transport position by stepping on. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. - Report machine damage or faulty operation immediately. - Do not allow children to play on or around machine.